HammerHeads 2 LED

Outstanding Light Output. Fully Suspended Shock Dampening
Vision X Europe HammerHeads 2 Led
  • LEDs: 2 x 10W
  • Housing Material: Aluminium
  • Light Colour Temp: 6000 Kelvin
  • EMC/EMI Approval: CISPR25-Class 3
  • Dimensions: 214/87/86mm
  • Weight: 1.0 kg
  • Voltage: 11-65V DC
  • Amperage: 0.76A@24V DC - 1.52A@12V DC
  • Vibration Rating: Up to 60 Grms
  • Lens Material: Polycarbonate
  • Certifications: CE, RoHS, IEC 62471
  • Revolutionary Protrac® 360° Aiming System
    Hammerheads can be adjusted before fitment using the plate and rotation angles on the revolutionary Protrac® bracket. A fit out library is also available to suit common mining equipment with known locations and angles for the optimum beam pattern.

    Electronic Thermal Management
    In an extraordinary situation where the light is subjected to massive heat overload, a self protection protocol is engaged to reduce the light output, until such time as the heat overload retreats to normal parameters.

    Soft Start Technology
    Low “in rush current” on start up reduces wear on associated components which is particularly important on machines where multiple lights are used. It avoids light misfires and eases load on existing wiring. This feature helps reduce costly downtime. Note: Soft start is not incorporated in 2 LED versions as in rush current is determined to be too small to benefit from this attribute.

    Reverse Polarity Operation
    Hammerheads will operate even when the polarity to the light is reversed. This is an advantage when retro-fitting Hammerheads to equipment that has previously been fitted with different work lights. This reduces the installation times for the technicians on site, therefore further reducing costs. It also prevents accidental damage caused by incorrect installation.

    CISPR 25 - Class 3 Rating
    The CISPR 25 - Class 3 rating ensures that Hammerheads do not introduce any RF noise into electronics/ radios, enabling unrestricted critical communication.

    HammerHeads 2 LED Usage Guide


    Every Light, Every Beam, Every Situation
    Using a clever coloured disc system, each beam pattern is linked to a different disc colour. This ensures beam patterns are easily distinguished for identification and eventual end of life replacement.
    All lights are available in a number of beam patterns including Spot, Flood, Wide Flood and Elliptical. Custom beam configurations are also available upon request.

    Easy Coloured Disc Identifier – Beam Patterns
    The entire Hammerheads range utilise a clever coloured disc system which quickly identifies the beam pattern of the light. For example the yellow discs indicate the light has a Flood beam pattern, whilst the red discs indicate the light uses a Spot beam pattern. This attribute is highly useful when the time comes to replace the light, as the visual cue of the colour allows the correct beam pattern to be identified without having to remove the light first to identify its beam pattern.


    ITEM# Beam Pattern Raw Lumens Effective Lumens Wattage
    HHL100210 10° Medium 1.8400 lm(ea) 1.198 lm(ea) 20 Watt
    HHL100240 40° Wide 1.8400 lm(ea) 1.198 lm(ea) 20 Watt
    HHL100260 60° Extra Wide 1.8400 lm(ea) 1.198 lm(ea) 20 Watt
    HHL10023060 Elliptical 1.8400 lm(ea) 1.198 lm(ea) 20 Watt
    Vision X Europe HHL2 Features

    Vision X Europe HammerHeads 2 Led

    The pattern and high volume of light output makes the focused beam ideal where precise illumination and light control is critical.

    The pattern boasts greater spread around the light and reduced intensity at the outer limits. Ideal when requiring a large volume of light spread around a work site or vehicle.

    The pattern boasts an even greater spread around the light and reduced intensity at the outer limits. Ideal when requiring a wider volume of light illuminating a work site or warehouse.

    The pattern produces an oval beam pattern with wider amount of light covering a medium distance. Ideal for when more penetration is required from the light. Great for applications that don’t require much upward or downward light.

    Whilst spot, flood, wide flood and elliptical beam patterns will suit most applications, there re certain applications that may require a custom beam pattern. Contact us for more information on how we can tailor our Hammerheads to suit your individual requirements.